krishnax12/tps2553-usb-power-switch
USB‑C 5V input board with CC pull-downs feeding a TPS2553 current-limited power switch, filtered 5V output connector, external enable control, and red overcurrent/fault LED indicator.
- Version
- 1.0.0
- License
- unset
- Stars
- 0
Files in (root)/reports
- board.circuit.json
- build.log
- CONTROL_STATUS.png
- CONTROL_STATUS.svg
- fresh-build-solver-inputs.json
- netlist.log
- pcb-style.log
- pcb.png
- pcb.svg
- placement.log
- POWER_SWITCH.png
- POWER_SWITCH.svg
- push.log
- schematic-placement.log
- schematic.png
- shorts-pcb.log
- shorts.log
- USB_INPUT.png
- USB_INPUT.svg
- validation.json
Related Packages
More from this authorkrishnax12/tensa-zangetsu-keychain-nfcSummary: Calculates target inductance and estimated resonance for a 14.5 MHz square antenna using chip, interturn, bridge, and connection capacitances.
Similar packagegokul/usb3-sd-hubEngineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
Discover something newhrithik18k/air-mouseA 44×68 mm ESP32-based wireless air-mouse PCB with USB-C Li-ion charging, switched 3.3 V regulation, ICM-20948 motion sensing, buttons, programming headers, and external controls.