abse/dual-usb-peltier-assembly
A USB‑C PD Peltier controller PCB combining RP2040 control, adjustable buck‑boost TEC power, temperature sensing, fan regulation, USB programming, protection, status LEDs, and external accessory hardware.
- Version
- 0.4.6
- License
- unset
- Stars
- 0
index.circuit.tsx
PCB
Schematic
// Amazon accessories:
// Peltier — HiLetgo TEC1-12706: https://www.amazon.com/dp/B00M1PM7H6
// HOT/COLD probes — HiLetgo DS18B20 (use two): https://www.amazon.com/dp/B00M1PM55K
// Fan — Noctua NF-A8 PWM, 12 V: https://www.amazon.com/dp/B00NEMG62M
export { GeneralPdDriverAssembly as default } from "./src/assembly/general-pd-assembly"
Related Packages
More from this authorabse/rp2350-mcu-boardThis code defines a compact, four-layer PCB hardware layout for the Raspberry Pi RP2350A microcontroller module, including the main IC, power regulation, USB-C connector, STM32-compatible headers, and associated passive components, with detailed component footprints, net connections, and copper pour zones for powering and ground references.
Similar package0hmX/dual-usb-peltier-assemblyA USB-C PD Peltier controller board featuring an RP2040, adjustable buck-boost TEC driver, temperature-sensor inputs, fan regulator, USB programming, protection, status LEDs, and supporting passives/connectors.
Discover something newpixalynx/cm5-minimal-carrierA 4-layer Raspberry Pi CM5 carrier board routes USB‑C 5V power through an RT9742 load switch with TVS protection and capacitive filtering, while providing ESD-protected HDMI output, CM5 connectors, test points, and ground/power planes.