abse/dual-usb-peltier-assembly

firmware/include/policy.h

#ifndef GENERAL_PD_POLICY_H
#define GENERAL_PD_POLICY_H
#include <stdbool.h>
#include <stdint.h>
#define PD_MIN_MV 2100u
#define PD_MAX_MV 15000u
#define PD_MIN_MA 500u
#define PD_MAX_MA 6000u
#define PD_MAX_MW 72000u
#define PD_DEFAULT_MV 12000u
#define PD_DEFAULT_MA 5500u
#define TPS_ADDRESS 0x75u
#define TPS_MODE_OFF 0x30u
#define TPS_MODE_ON 0xB0u
#define TPS_INTERNAL_FB 0x02u
#define TPS_CDC_FAULTS 0xA0u /* 1 enables SC/OVP indication; OCP is normal CC. */
#define TPS_FATAL_STATUS 0xA0u

typedef struct { uint16_t voltage_mv, current_ma; } pd_settings;
void pd_defaults(pd_settings *settings);
bool pd_valid(const pd_settings *settings);
bool pd_set(pd_settings *settings, uint16_t voltage_mv, uint16_t current_ma);
uint16_t pd_reference_code(uint16_t voltage_mv);
uint8_t pd_current_code(uint16_t current_ma);
#endif