A 4-layer ESP32-S3 carrier board with USB-C power, AMS1117 3.3 V regulation, FFC interface, reset/boot controls, status LED, and optional user buttons.
# Muse DevKit replacement
Original four-layer tscircuit carrier for the Status RGB and BOOT control role.
- Board: 46 × 42 mm
- MCU: ESP32-S3-WROOM-1-N16R8
- Via rule: 0.30 mm drill / 0.45 mm land
- JLCPCB/LCSC part numbers are attached to every assembled component.
This is a role-equivalent original design, not a mechanical clone of a commercial board.
More from this authorShiboSoftwareDev/pico-wThis code defines a detailed PCB footprint and symbolic representation of a Raspberry Pi Pico W microcontroller, illustrating its physical pins, electrical connections, and silkscreen layout.
Similar packagemohan-bee/esp32-c3This hardware design integrates an ESP32-C3 microcontroller, a USB-C connector, a power management IC (AP2112-3.3V regulator), a USB-to-Serial converter (CH340C), several resistors, capacitors, and user-accessible headers to facilitate USB communication, power regulation, and general I/O interfacing.
Discover something newimrishabh18/pcbgolfA complete 4-layer PCBGolf controller PCB with STM32H7 MCU, USB/SD and CAN interfaces, power regulation, protection, connectors, switches, LEDs, clocking, and supporting passives.