pixalynx/cm5-minimal-carrier
A 4-layer Raspberry Pi CM5 carrier board routes USB‑C 5V power through an RT9742 load switch with TVS protection and capacitive filtering, while providing ESD-protected HDMI output, CM5 connectors, test points, and ground/power planes.
- Version
- 0.1.1
- License
- unset
- Stars
- 0
references/CM5IO-README.TXT
These files have been created in version 9 of KiCAD.
Some of the 3d models need to be downloaded form the following places and put into the CM5IO.3shapes directory some models are approximations.
https://datasheets.raspberrypi.org/cm5/CM5-step.zip
https://www.molex.com/molex/products/part-detail/memory_card_socket/5033981892
The models provided in the 3dmodels directory are from various manufacturers including Diodes, Hirose, MTCONN, Toby, TRXCOM. Terms and conditions for the use of the models remain with the original manufacture.
Related Packages
More from this authorpixalynx/edge-connectorConfigures USB-A, Micro-USB, and USB-C PCB-edge connectors with exposed copper contacts and automatically shaped, positioned board tongues.
Similar packagegokul/usb-hub-boardA 4-layer 100×66 mm USB 2.0 hub board with a USB‑C upstream port, four protected downstream USB‑C/USB‑A ports, an integrated SD card reader, USB hub controllers, 3.3 V regulation, ESD protection, current-limited power switches, crystal oscillators, and filtering/passive components.
Discover something newolivergrabinski/weather-stationA compact ESP32-S3 Wi‑Fi/Bluetooth module is powered by an AP2112K 3.3 V regulator, with a JST SH connector and blue status LED.