pixalynx/cm5-minimal-carrier

A 4-layer Raspberry Pi CM5 carrier board routes USB‑C 5V power through an RT9742 load switch with TVS protection and capacitive filtering, while providing ESD-protected HDMI output, CM5 connectors, test points, and ground/power planes.

Version
0.1.1
License
unset
Stars
0

imports/RT9742SNGV/RT9742SNGV.tsx

import objPath from "./RT9742SNGV.obj"
import stepPath from "./RT9742SNGV.step"
import type { ChipProps } from "@tscircuit/props"

export const RT9742SNGVCadModel = {
        objUrl: objPath,
        stepUrl: stepPath,
        pcbRotationOffset: 90,
        modelOriginPosition: { x: 0.000012699999956566899, y: 0, z: 0 },
  modelUnitToMmScale: 1,
}

const pinLabels = {
  pin1: ["VIN"],
  pin2: ["VOUT"],
  pin3: ["GND"]
} as const

const pinAttributes = {
  pin1: {requiresPower: true},
  pin3: {requiresGround: true}
} as const

export const RT9742SNGV = (props: ChipProps) => {
  return (
    <chip
      pinLabels={pinLabels}
      pinAttributes={pinAttributes}
      supplierPartNumbers={{
  "jlcpcb": [
    "C3235509"
  ]
}}
      manufacturerPartNumber="RT9742SNGV"
      footprint={<footprint>
        <smtpad portHints={["pin1"]} pcbX="1.235075mm" pcbY="-0.94996mm" width="1.0700004mm" height="0.5999988mm" shape="rect" />
<smtpad portHints={["pin2"]} pcbX="1.235075mm" pcbY="0.94996mm" width="1.0700004mm" height="0.5999988mm" shape="rect" />
<smtpad portHints={["pin3"]} pcbX="-1.235075mm" pcbY="0mm" width="1.0700004mm" height="0.5999988mm" shape="rect" />
<silkscreenpath route={[{"x":0.8760714000002281,"y":1.5361919999999145},{"x":-0.8763253999998142,"y":1.5361919999999145},{"x":-0.8763253999998142,"y":0.49458879999997407}]} />
<silkscreenpath route={[{"x":0.8760714000002281,"y":-1.5361920000000282},{"x":-0.8763253999998142,"y":-1.5361920000000282},{"x":-0.8763253999998142,"y":-0.49458879999997407}]} />
<silkscreenpath route={[{"x":0.8760714000002281,"y":0.45539659999997184},{"x":0.8760714000002281,"y":-0.45539659999985815}]} />
<silkscreentext text="{NAME}" pcbX="-0.012827mm" pcbY="2.524mm" anchorAlignment="center" fontSize="1mm" />
<courtyardoutline outline={[{"x":-2.0281269999999267,"y":1.774000000000001},{"x":2.0024730000002364,"y":1.774000000000001},{"x":2.0024730000002364,"y":-1.7993999999999915},{"x":-2.0281269999999267,"y":-1.7993999999999915},{"x":-2.0281269999999267,"y":1.774000000000001}]} />
      </footprint>}
      cadModel={RT9742SNGVCadModel}
      {...props}
    />
  )
}