imrishabh18/pcbgolf

A complete 4-layer PCBGolf controller PCB with STM32H7 MCU, USB/SD and CAN interfaces, power regulation, protection, connectors, switches, LEDs, clocking, and supporting passives.

Version
1.6.1
License
unset
Stars
0

footprints/Footprint_PP_1212_8.tsx

// Source: commaai/PCBGolf/pcbgolf.pretty/PP-1212-8.kicad_mod
// Generated by footprints/generate.py. Coordinates are millimetres, +Y up.
export const Footprint_PP_1212_8 = () => (
  <footprint originalLayer="top">
    <smtpad name={"pad_1"} pcbX={-1.4925} pcbY={0.99} portHints={["pin1","1"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.99} height={0.405} />
    <smtpad name={"pad_2"} pcbX={-1.4925} pcbY={0.33} portHints={["pin2","2"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.99} height={0.405} />
    <smtpad name={"pad_3"} pcbX={-1.4925} pcbY={-0.33} portHints={["pin3","3"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.99} height={0.405} />
    <smtpad name={"pad_4"} pcbX={-1.4925} pcbY={-0.99} portHints={["pin4","4"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.99} height={0.405} />
    <smtpad name={"pad_5"} pcbX={1.4925} pcbY={-0.99} portHints={["pin5","5"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.76} height={0.405} />
    <smtpad name={"pad_6"} pcbX={1.4925} pcbY={-0.33} portHints={["pin6","6"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.76} height={0.405} />
    <smtpad name={"pad_7"} pcbX={1.4925} pcbY={0.33} portHints={["pin7","7"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.76} height={0.405} />
    <smtpad name={"pad_8"} pcbX={1.4925} pcbY={0.99} portHints={["pin8","8"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={0.76} height={0.405} />
    <smtpad name={"pad_9"} pcbX={0.5} pcbY={-0.0} portHints={["pin9","9"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={1.725} height={2.235} />
    <silkscreenpath route={[{"x":-1.65,"y":1.65},{"x":1.65,"y":1.65}]} />
    <silkscreenpath route={[{"x":-1.65,"y":-1.65},{"x":1.65,"y":-1.65}]} />
    <courtyardrect pcbX={-0.057500} pcbY={0.000000} width={4.360000} height={3.802000} layer="top" />
  </footprint>
)