imrishabh18/pcbgolf

A complete 4-layer PCBGolf controller PCB with STM32H7 MCU, USB/SD and CAN interfaces, power regulation, protection, connectors, switches, LEDs, clocking, and supporting passives.

Version
1.6.1
License
unset
Stars
0

footprints/Footprint_CREE_RGB_CLMVC.tsx

// Source: commaai/PCBGolf/pcbgolf.pretty/CREE-RGB-CLMVC.kicad_mod
// Generated by footprints/generate.py. Coordinates are millimetres, +Y up.
export const Footprint_CREE_RGB_CLMVC = () => (
  <footprint originalLayer="top">
    <smtpad name={"pad_1"} pcbX={-0.75} pcbY={0.55} portHints={["pin1","U1"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={1.0} height={0.8} />
    <smtpad name={"pad_2"} pcbX={-0.75} pcbY={-0.55} portHints={["pin2","U2"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={1.0} height={0.8} />
    <smtpad name={"pad_3"} pcbX={0.75} pcbY={-0.55} portHints={["pin3","U3"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={1.0} height={0.8} />
    <smtpad name={"pad_4"} pcbX={0.75} pcbY={0.55} portHints={["pin4","U4"]} solderMaskMargin={0.0508} solderPasteMargin={0.0} layer={"top"} shape={"rect"} width={1.0} height={0.8} />
    <silkscreenpath route={[{"x":-1.25,"y":1.1},{"x":1.25,"y":1.1}]} />
    <silkscreenpath route={[{"x":1.25,"y":-1.1},{"x":-1.25,"y":-1.1}]} />
    <silkscreenpath route={[{"x":-1.17,"y":1.12},{"x":-1.1776120467488713,"y":1.158268343236509},{"x":-1.1992893218813452,"y":1.190710678118655},{"x":-1.231731656763491,"y":1.2123879532511288},{"x":-1.27,"y":1.2200000000000002},{"x":-1.308268343236509,"y":1.2123879532511288},{"x":-1.3407106781186549,"y":1.190710678118655},{"x":-1.3623879532511287,"y":1.158268343236509},{"x":-1.37,"y":1.12},{"x":-1.3623879532511287,"y":1.0817316567634911},{"x":-1.3407106781186549,"y":1.0492893218813453},{"x":-1.308268343236509,"y":1.0276120467488714},{"x":-1.27,"y":1.02},{"x":-1.231731656763491,"y":1.0276120467488714},{"x":-1.1992893218813452,"y":1.0492893218813453},{"x":-1.1776120467488713,"y":1.0817316567634911},{"x":-1.17,"y":1.12}]} />
    <courtyardrect pcbX={0.000000} pcbY={0.000000} width={3.000000} height={2.500000} layer="top" />
  </footprint>
)