gokul/mpu6050-mini
Compact 3.3 V MPU-6050 accelerometer/gyroscope breakout board with I²C header, interrupt/address pins, decoupling capacitors, pull-up resistors, and a ground plane.
- Version
- 1.0.2-test
- License
- unset
- Stars
- 0
README.md
# MPU-6050 Mini — test rebuild
This is a test publication of the existing 11 × 12 mm MPU-6050 board source using tscircuit 0.0.2924. The circuit source is unchanged from the published v1.0.1 release.
J1 is a six-hole, 1.27 mm-pitch connector position. Pin order: 3V3, GND, SDA, SCL, INT, AD0.
**Do not use this release for fabrication.** The current build reports a PCB placement error: a routed via overlaps C4 pin 1. This test release includes source only so the preview can be checked without presenting stale manufacturing exports as current.
Related Packages
More from this authorgokul/usb3-sd-hubEngineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
Similar packageimrishabh18/motor-driver-breakout"A 30x30mm TB6612FNG motor driver board with dual 8-pin headers and bypass capacitors for motor control and power regulation"
This summary captures the key physical characteristics:
- Uses TB6612FNG motor driver chip
- 30x30mm board size
- Dual 8-pin headers (JP1 and JP2)
- Includes decoupling capacitors (C1, C2, C3)
- Purpose is motor control and power management
Discover something newmohan-bee/infrared-battle-tagA compact board featuring an ATtiny1616 microcontroller, tactile switch, and MMBT2222A transistor, with VCC/GND power and the switch connected to the MCU’s PA4 input.