ShiboSoftwareDev/nema8-20mm-usbc-pd-controller
A 20×20 mm four-layer USB‑C PD stepper motor controller PCB using a CH32X035 MCU, TMC2209 driver, protected power inputs, USB data/boot interface, 3.3 V regulation, ESD/TVS protection, current-sense circuitry, and NEMA‑8 motor outputs.
- Version
- 1.0.13
- License
- unset
- Stars
- 0
index.circuit.tsx
PCB
Schematic
// The package entrypoint intentionally renders the validated four-layer board.
// Keep implementation in one file so local checks and published releases cannot
// silently diverge again.
export { default } from "./four-layer.circuit"
Related Packages
More from this authorShiboSoftwareDev/f1c100s-linux-stepper-controllerA four-layer Linux motor-control carrier built around an Allwinner F1C100S SoC, USB‑C, SPI flash, multi-rail power regulation, DRV8825 stepper-driver stage with protection/current sensing, temperature monitoring, and external I/O connectors.
Similar packagegokul/usb3-sd-hubEngineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
Discover something newseveibar/f1c100s-linux-dev-boardA 4-layer F1C100S Linux development carrier board with USB‑C power/data, multi-rail LDOs, SPI NOR flash, reset/boot interfaces, I²C/SPI/UART headers, ESD protection, and a buffered 5‑V clocked RGB LED.