ShiboSoftwareDev/linux-gameboy-advance
Multilayer PCB carrier board integrating USB-C, battery charging/power management, buck-boost regulation, SoC/display/SD interfaces, audio controls, status LEDs, backlight, and UART/I²C/SPI service connectors.
- Version
- 1.0.131
- License
- unset
- Stars
- 0
firmware/rgb-demo.sh
#!/bin/sh
# Compatibility entry point; requires libgpiod 2.x Python bindings.
exec python3 "$(dirname "$0")/rgb-demo.py" --demo "$@"
Related Packages
More from this authorShiboSoftwareDev/muse-reterminal-e1001-replacementA four-layer ESP32-S3 e-paper carrier board with USB-C power, AMS1117 3.3V regulation, 24-pin FFC interface, reset/boot and user buttons, status LED, decoupling passives, test points, mounting holes, and ground/power planes.
Similar packagegokul/usb3-sd-hubEngineering draft: four-layer, computer-powered USB 3 hub with one USB-C host socket, two USB-C and two USB-A accessory sockets, and a full-size SD slot. Board and three schematic previews are available. Routing and production checks are incomplete; not fabrication ready.
Discover something newgokul/fieldkit-usbUSB-C-powered ESP32-S3 Wi-Fi/Bluetooth handheld with an SMD 128x32 OLED, six navigation buttons, USB-C power/data, complete checked routing, and four native schematic sheets.